Fix My Speaker: Water Eject Sound & Phone Cleaner
Need to fix my speaker or remove water from phone? Select your device type below to play acoustic water eject sound frequencies (165Hz–500Hz) and clean muffled phone speakers instantly.
端末を選択
最適な水抜き周波数と手順を読み込むため、デバイスタイプを選択してください。
安全警告＆準備事項
端末の音量を最大に設定してください。イヤホン・ヘッドホンは絶対に使用しないでください！ケースを外し、スピーカーを柔らかい布に向けて下向きにしてください。
スマホ用スピーカー水抜き音源
端末音量100%必須。スピーカーを下向きに。イヤホン使用禁止。
水抜きツールの仕組み
端末を選択
上記からお使いの端末タイプを選択して最適な音響周波数 (165Hz〜300Hz) を読み込みます。
サウンドを再生
音量を100%に上げ、スピーカー口を下に向けて「水抜きを開始」を押します。
水分が排出される
強力な音波振動とバイブレーションパルスにより、内部の水分が吹き飛ばされます。
What problem are you having?
Select your issue to get specific help
Recommended Solution
Call speakers (earpiece) are delicate. Place your device face-down on a soft cloth. Let gravity help water drain. Avoid inserting anything into the speaker opening.
What is Water Removal Sound?
Water removal sound is a scientifically-proven technique that uses specific audio frequencies to eject water trapped inside your device speakers. When water enters your phone, tablet, or laptop speaker, it blocks the speaker membrane and causes muffled or distorted audio. Our water eject sound technology creates precise vibrations that physically push water droplets out of the speaker grille.
This method works similarly to how the Apple Watch ejects water after swimming, by playing low-frequency tones that cause rapid vibrations in the speaker membrane. These vibrations create enough force to expel water without damaging your device. It is the safest and most effective way to remove water from speakers compared to outdated methods like rice or heat.
Quick Emergency Checklist
- ▪ Power off device immediately or enable airplane mode
- ▪ Remove SIM card tray to check moisture indicator
- ▪ Shake phone gently with speaker facing downward
- ▪ Play water eject tone at full volume for 60 seconds
- ▪ Use manufacturer app if available (Samsung has built-in feature)
- ▪ Dry in well-ventilated area for minimum 4 hours
- ▪ Check for moisture warning before charging
How to Remove Water From Speaker: Step-by-Step
Turn Off Your Device
Immediately power off your phone, tablet, or laptop to prevent short circuits. Do not press any buttons excessively.
Remove Cases and Accessories
Take off any protective cases, screen protectors, or accessories that can trap moisture against your device.
Shake Out Excess Water
Gently shake your device with the speaker facing downward to remove loose water droplets.
Set Volume to Maximum
Turn your device back on and set the media volume to 100% to create sufficient acoustic kinetic pressure.
Play Water Eject Sound
Use our water removal tool above (165Hz for light water, or 300Hz-500Hz for stubborn droplets) for 30-60 seconds.
Repeat if Necessary
If sound remains muffled, repeat the process 2-3 times with 5-10 minutes between sessions.
Things Not to Do
Do not use rice
It is ineffective and can leave starch residue and dust particles inside your device ports.
Do not use heat sources
Avoid hair dryers, ovens, or microwaves. Heat can melt internal adhesives and damage delicate batteries.
Do not insert objects
Do not insert cotton swabs or toothpicks into speaker holes. You will push water deeper and puncture the grille.
Do not charge the phone
Do not charge the phone while the moisture warning is active to avoid short circuits.
Do not attempt to disassemble
Do not attempt to open the phone yourself unless you are an authorized technician.
Test With Sample Music
Use our high-resolution audio samples to verify your speaker is working properly and sounding crisp after water removal.
Open Speaker Test Music →Device Compatibility
Our water removal sound tool works with all major devices and brands. Here are some of the devices we support:
iPhones
Works on all iPhones including iPhone 17, 16 series, 15 series, 14, 13, 12, 11, SE models, and newer models.
Samsung
Supports Galaxy S25 series, S24 series, S23, A55, A54, A35, Z Fold 6, Z Flip 6, and newer models.
Google Pixel
Works on Pixel 9 Pro XL, 9 Pro, 9, 8 Pro, 8a, 8, 7 Pro, 7a, 6 Pro, 6, and newer models.
Other Android
Supports OnePlus, Xiaomi, OPPO, Realme GT, Motorola Edge, Nothing Phone, and more.
Tablets
Works on iPad M2, iPad Mini, Samsung Tab S10 and S9, Xiaomi Pad 6, and all major Android tablets.
Laptops
Supports MacBook M3 models, Dell XPS, HP Spectre, ThinkPad, ASUS ROG, Surface, and more.
Earbuds
Supports AirPods Pro 2, AirPods 4, Galaxy Buds 3, Pixel Buds Pro, Sony WF-1000XM5, Jabra Elite.
Smartwatches
Supports Apple Watch Ultra 2 and Series 10, Galaxy Watch 7, Pixel Watch 3, Garmin, Fitbit.
Why Display Test Online is Different
Most Fix My Speaker sites rely on a single basic tone that only works in light moisture situations. Display Test Online provides scientifically optimized diagnostic engines designed to target different droplet sizes and speaker types.
Customized for Your Device
Device-specific presets for iPhones, Android phones, tablets, laptops, and call speakers.
Hardware-Tuned Frequencies
Fully dynamic sound frequencies (165Hz, 300Hz, 500Hz, and resonant sweeps) for maximum liquid ejection.
Works on All Devices
From smartphones and iPads to MacBooks and earbuds, our Web Audio synth runs universally.
100% Free & Safe
No downloads, no apps, no ads. Just open in browser and clean your speaker safely.
When to Seek Professional Repair
Consider professional help immediately if you observe any of the following:
- ⚠️ Moisture warning persists after 48 hours of drying.
- ⚠️ Speaker produces absolutely no sound or severely distorted, unidentifiable audio.
- ⚠️ Liquid Damage Indicator (LDI) shows red or pink color.
- ⚠️ Phone shows other severe symptoms like screen flickering, boot looping, or battery swelling.
- ⚠️ Warranty is still active and covers water damage (check your policy first).
よくある質問 (FAQ)
この診断機器、校正手順、ディスプレイ技術規格について知っておくべきすべての情報。